Sagem my220x Mobile Cell Phone Disassembly Guide

From Repair4MobilePhone
Revision as of 14:35, 20 June 2012 by Werner Heuser (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Here are disassembly instructions for the Sagem my220x mobile phone. You need a small Phillips (CrossHead) PH00 screwdriver and a flat piece of plastic (e.g. a credit card) to start the job. This mobile phone can be completely taken apart really easy. For a detailed picture in high resolution click on the thumbnail.

Sagem my220x front view.jpeg
  Before you start, this is a front view of the mobile phone not yet disassembled.

Sagem my220x backside view.jpeg
  A view from the backside.

Sagem my220x backcover and battery removed.jpeg
  Backcover and battery of the mobile phone have to be removed first. The backcover can be taken off without a tool just with your fingernails.

Sagem my220x screws removed.jpeg
  All the six screws fixing the two halves of the case together can be accessed and removed easily.

Sagem my220x how to open.jpeg
  How to separate the two halves of the case with a plastic tool (e.g. a credit card).

Sagem my220x top and bottom case apart.jpeg
  Top and bottom halves of the case separated.

Sagem my220x case opened.jpeg
  The inner tray and the top half of the mobile phone case separated.

Sagem my220x inner tray and keypad separated.jpeg
  The inner tray and the keypad can now be separated.

Sagem my220x how to pry off the screen.jpeg
  The LCD screen is glued to the base. It can be pryed off from the base with a screwdriver.

Other Resources

Disclaimer and Copyright

Warning: These instructions are given without any warranty. They don't have to be complete or correct. Don't do any of the following steps if you're not sure of what you're doing. You could damage your mobile cellular phone and you WILL lose your warranty. Everything you do will be at your own risk.

Personal tools

Google AdSense